Go Back   Data Center, Colocation, Cloud Computing, Storage, Dedicated Servers Forums > Server Rack / SAN/NAS Storage Forum > Storage: Disk, RAID and NAS/SAN

Reply

 

Thread Tools
  #1  
Old 05-13-2009, 12:41 PM
cherokeeflyer cherokeeflyer is offline
Junior Member
 
Join Date: May 2009
Posts: 14
Default How to decipher LSI Megaraid RAID status

Ok, here's the output from megacli:

Code:
Adapter 0 -- Virtual Drive Information:
Virtual Disk: 0 (target id: 0)
Name:
RAID Level: Primary-1, Secondary-3, RAID Level Qualifier-0
Size:476836MB
State: Optimal
Stripe Size: 64kB
Number Of Drives:2
Span Depth:2
Default Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU
Access Policy: Read/Write
Disk Cache Policy: Enabled
First, this is supposed to be Raid 10. Does "RAID Level: Primary-1, Secondary-3, RAID Level Qualifier-0" indicate Raid 10, and if so, why is it shown this way?

I'm assuming somehow this is showing that it is a 'mirrored' stripe, but I'm not sure what "secondary-3" actually means.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:10 AM.

Member Area



Data Center Industry Daily News


Cloud and Dedicated Hosting


Sponsors Managed Servers Sponsored by DedicatedNOW.
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.