Confusing about PDUs 1PH/3PH
I was looking at APC racks and PDUs.
I have 10 server which have a 1050W power supply each.
The server spec says:
Line Voltage (220) - Min 180Vrms - Rated 200-240Vrms - Max 264 Vrms
I need a PDU that will work for this.
Looking at a PDU that has
Nominal Input 208V 3PH
Nominal Output 208V
Would this work for the server?
If the input is 3PH, is the output single phase knowing that the connectors on it are C13 ?
|